16
Status Icon Information
Your product displays status icons on the LCD screen for certain product status conditions. Press the
icon to view or change the current network settings.
Icons
Description
or
Job/Status
Displays the
Job Status
and
Printer Status
screens
No Ethernet connection
An Ethernet connection is established
No Wi-Fi connection
A Wi-Fi network error has occurred or the product is searching for a connection
A Wi-Fi connection is established; the number of bars indicates the connection's signal
strength
No Wi-Fi Direct connection
A Wi-Fi Direct connection is established
The Mute setting is enabled. The product does not make any sound when you press
buttons or select icons on the control panel. Select this icon to change the setting.
Quiet Mode is enabled. Noise is reduced during printing, but the print speed may be
reduced. Select this icon to change the setting.
Quiet Mode is disabled. Select this icon to change the setting.
Enables sleep mode and turns off the LCD screen
Displays the
Fax Data Information
screen
Displays additional information or instructions, such as loading paper or placing a
document
The indicated setting has changed
There is a problem with the indicated setting; select the icon to resolve the problem
Summary of Contents for C11CG36201
