Epson C117001-N - DFX 5000+ B/W Dot-matrix Printer, User Manual

Page: 95 / 229

procedure. If you’re still having trouble printing, see Chapter 7 for
troubleshooting information.
Using word processors
Word processors usually let you use a fixed set of printer features
by placing markers around the text to be altered. When the
document is printed, the markers are recognized and translated
into suitable commands for your printer. Some programs show
the markers on the screen, while others display the text as it will
look when it prints (for example, in bold or italics).
Some word processing programs also let you insert printer
commands in your document. These commands may or may not
be visible on the screen. This method has the advantage of
allowing you to use any DFX-5000 printer feature, not just the
features available with your word processing program.
To use printer commands, first check your word processor
manual to see if the software allows you to insert printer
commands in your document. Then see the section on sending
commands to the printer in Chapter 4. Also see the Command
Summary in Chapter 8 for a list of the commands available on the
DFX-5000.
Using spreadsheets
Although spreadsheets seldom use as many printing styles as
word processors, they do have some very specific requirements.
If your spreadsheet program provides a list of printers, use the list
on the last page to find the proper selection. If your spreadsheet
doesn’t have a printer setup routine, read the program’s manual
carefully for information on printing.
A major concern when printing spreadsheets is the number of
columns, or characters, that can fit on a line. In its normal printing
pitch of 10 characters per inch (cpi), the DFX-5000 can print up to
136 characters in a line. You can increase the number of characters
Using the Printer
3-21