Epson C117001-N - DFX 5000+ B/W Dot-matrix Printer, User Manual

Page: 34 / 229

If you want to run the self test in NLQ mode, follow Steps 1 and 2
above using the
FORM FEED
button instead of the
LINE FEED
button.
Here is part of a self test printout run in NLQ mode:
Country U . S . A .
P a g e l e n g t h ( i n c h ) 1 1
To run the self test in the normal draft mode, you need to first
select normal draft mode by changing your printer’s DIP switch
settings. This procedure is described in the section on setting DIP
switches in Chapter 3. Once the printer is set for the normal draft
mode rather than high-speed draft, you can run the self test by
following the same procedure as for high-speed draft. Here is part
of a self test printout run in normal draft mode:
Setting Up the Printer
1-23