199
Note:
If the projector does not turn off and the lights continue flashing, see the link below for a
solution.
Parent topic:
Copying Menu Settings Between Projectors
Scheduling Projector Events
You can save a projector command, such as turning the projector on or off or switching input sources, as
an "event." You can schedule when you want the projector to automatically execute the command.
Caution:
Do not place flammable objects in front of the lens. If you schedule the projector to turn on
automatically, flammable objects in front of the lens could catch on fire.
Note:
The
Schedule
setting in the Menu Protection menu must be turned off to schedule an event.
Saving a Scheduled Event
Viewing Scheduled Events
Editing a Scheduled Event
Parent topic:
Related tasks
Selecting Password Security Types
Setting a Password
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
Note:
Light Source Calibration events do not start if the projector is not used continuously for at least 20
minutes, or if the projector is regularly turned off by shutting off the power outlet. Set Light Source
Calibration events to occur only after 100 hours of usage.
Note:
The
Schedule
setting in the Menu Protection menu must be turned off to schedule an event.
1.
Set the date and time in the
Management
menu.
2.
Press the
Menu
button.
3.
Select the
Management
menu and press
Enter
.
4.
Select the
Schedule Settings
setting and press
Enter
.
Summary of Contents for BrightLink 1480Fi
