
184
3.
Select
Yes
and press
Enter
.
4.
Press and hold down the
Num
button on the remote control and use the numeric buttons to set a
four-digit password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
5.
Enter the password again.
You see the message "Password accepted."
6.
Press
Esc
to return to the menu.
7.
Make a note of the password and keep it in a safe place in case you forget it.
Parent topic:
Selecting Password Security Types
After setting a password, you see this menu, allowing you to select the password security types you want
to use.
If you do not see this menu, hold down the
Freeze
button on the remote control for about five seconds or
until the menu appears.
• To prevent unauthorized use of the projector, select
Power On Protection
, press
Enter
, select
On
,
press
Enter
again, and press
Esc
.
Summary of Contents for BrightLink 1480Fi
