95
Removing the Shipping Screw
To prevent damage during shipping, a shipping screw is attached to the transparency
unit to secure its lamp assembly. You must remove this screw before using the
transparency unit.
1. Turn the transparency unit so the glass side faces up.
2. Use a Phillips head (cross
head) screwdriver to remove
the shipping screw from the
hole labeled
CLAMP
, as
shown at right.
3. Install the screw in the
storage hole labeled
STOCK
.
Before transporting the scanner,
be sure to reinstall the shipping screw in the hole labeled
CLAMP
, and slide the
transportation lock at the back of the scanner to the
LOCK
position.
Installing the Transparency Unit
Follow these steps to install the transparency unit on the scanner.
1. Make sure the scanner is turned off. Then unplug the power cable from the
scanner.
2. Remove the document cover
by grasping the back of the
document cover as shown and
easing the cover up.
3. Make sure the document table
is clean and dust free.
saffron.book Page 95 Tuesday, January 11, 2000 2:32 PM
