Specifications
111
SCSI Interface
Interface type:
ANSI X3T9.2/375R Revision 10L (SCSI 2)
Functions:
BUS FREE phase
ARBITRATION phase
SELECTION/RESELECTION phase
COMMAND phase (the Logical unit number is fixed
at 0 and the command link function is not supported)
DATA phase
DATA IN phase
DATA OUT phase
STATUS phase
MESSAGE phase
MESSAGE IN phase
MESSAGE OUT phase
ATTENTION condition
RESET condition
Logic level:
TTL compatible
Electrical standard:
ANSI X3T9.2/375R Revision 10L (SCSI 2)
ID setting:
Can be set from 0 to 7
Terminator:
Internal terminator selectable (enable/disable)
Connector type:
Two half-pitch 50-pin connectors
Connector pin arrangement:
25
50
1
26
shallot.book Page 111 Thursday, January 27, 2000 9:59 PM
Summary of Contents for B107011F - GT 10000
