13
4
Verify that the
Mic
light on the AP-60 is lit. The light should match the
Channel
selector on the pendant
microphone.
5
Adjust the microphone sensitivity by rotating the
Gain
control wheel on the pendant microphone, if
necessary.
Note
If your system has more than one microphone, make sure that each microphone is on a different channel. The sound
cannot be received properly when multiple microphones are used on the same channel.
The sound from the microphone is transmitted from the black dome on the front of the microphone. Be sure to keep
this part of the microphone free of obstructions when in use.
Audio from the microphone may not be transmitted reliably when the microphone is used up against a wall or in a
corner.
Channel selector
Mic lights
Gain control wheel
