PSB No: P-0082
Page:
10
of
14
ESC ( t
d3 (Assign Character
t nl
dl d2
is the command for assigning character tables where n1,
and
Variable dl is a number corresponding to one of
four tables
selectable with the ESC t n command. This is the table that will be replaced. Valid
below).
corresponding to a registered table.
is the table that
the table
indicated by Variable d1. Valid Values for d2 are 0,
and 9 (see Table 2
dl
I
0
1
Table 1
I 3
I
II I
I
After using the ESC ( t command, the ESC t n command MUST be sent to select the
table before printing from the new table. For example, the command ESC ( t 3 0 1 3
0 is sent (assign Registered Table 3
to Selectable Table 1
In order
to print the character (ASCII
the command ESC t 1 must be sent. In the Basic
programming language, the sequence would be as follows:
LPRINT
LPRINT
Some
documentation may illustrate as many as 22 different Registered
Tables. The Registered Tables are a part of the character set, therefore, they are
contained in the Character Generator ROM. The CG ROM differs based upon the
destination country. For
reason, only the above Registered Tables are available
on
and
printers sold for the U.S. market. Foreign
Character Generator ROMs ARE NOT available in the United States. The following
