Epson AL-MX200 Series User Manual Download

Page: 313 / 410

A4 - 210x297mm

A5 - 148x210mm

B5 - 182x257mm

Letter - 8.5x11"

Folio - 8.5x13"

Legal - 8.5x14"

Executive

Factory default menu setting

Lighten/Darken

Purpose:

To specify the default scan density level.

Values:

Lighten2

Makes the scanned image lighter than the original. Works well with dark print.

Lighten1

Normal

Works well with standard typewritten or printed documents.

Darken1

Makes the scanned image darker than the original. Works well with light print
or faint pencil markings.

Darken2

Factory default menu setting

Sharpness

Purpose:

To specify the default sharpness level.

Values:

Sharpest

Makes the scanned image sharper than the original.

Sharper

Normal

Does not make the scanned image sharper or softer than the original.

AL-MX200 Series User’s Guide

Using the Operator Panel Menus and Keypad

313

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Search results

Summary of Contents for AL-MX200 Series

Reviews:

Related manuals for AL-MX200 Series

Brands by name

Popular brands

Epson AL-MX200 Series, User Manual

Search results

Summary of Contents for AL-MX200 Series

Reviews:

Related manuals for AL-MX200 Series

Brands by name

Popular brands