Epson AL-M7150DN User Manual Download Page 204

Page: 204 / 296

(Off default for 220 - 240 V models)

(On default for 110 V models)

Forced Stirring Toner:

Mixes toner in the developer to spread it evenly.

Fuser Temperature:

Saves power by not adjusting the temperature of the fuser while in ready mode. Selecting

Keep

increases the power consumption but shortens the time until printing starts from the ready mode. If

Quick Sleep

is set to

, the temperature will not be adjusted after printing even if it is set to

Keep

(Don't Keep default)

Fuser Control:

Select Reduce Flicker if the fluorescent light flickers when printing.

(Normal default)

Noise Level:

Adjusts the image gradation. Image gradation gets better as the value increases, but image granularity
gets worse.

0 to 7 (3 default)

Print Pattern:

Prints a halftone or full pattern that allows you to check for unevenness in the density or pitch on the
printout.

Screen 25

Prints the pattern in a 25% density halftone.

Screen 50

Prints the pattern in a 50% density halftone.

Screen 100

Prints the pattern at 100% density.

Font Specifications

The following fonts are available on the Internet.

❏

Epson Barcode Font

Available Fonts for PostScript

Font Name

Family

HP Equivalent

Nimbus Mono

Medium, Bold, Italic, Bold Italic

Courier

Product Information

Font Specifications

Available Fonts for PostScript

204

Summary of Contents for AL-M7150DN









































































































































































































































































































Search results

Summary of Contents for AL-M7150DN

Reviews:

Related manuals for AL-M7150DN

Brands by name

Popular brands

Epson AL-M7150DN, User Manual

Search results

Summary of Contents for AL-M7150DN

Reviews:

Related manuals for AL-M7150DN

Brands by name

Popular brands