Epson AL-M300 Series User Manual Download Page 13

Page: 13 / 225

Safety Instructions

Warning, Caution, Important and Note

Warning

must be followed carefully to avoid serious bodily injury.

Caution

must be observed to avoid bodily injury.

Important

must be observed to avoid damage to your equipment.

Note

contains important information and useful tips on the operation of your printer.

Important Safety Instructions

Note:

The illustrations in this section show the AL-M400 Series as an example.

Setting up the printer

❏

Be sure to lift the printer by the correct positions as shown below.

❏

When moving the printer, always keep it horizontal.

AL-M300/AL-M400 Series User's Guide

Safety Instructions

Summary of Contents for AL-M300 Series


































































































































































































































Search results

Summary of Contents for AL-M300 Series

Reviews:

Related manuals for AL-M300 Series

Brands by name

Popular brands

Epson AL-M300 Series, User Manual

Search results

Summary of Contents for AL-M300 Series

Reviews:

Related manuals for AL-M300 Series

Brands by name

Popular brands