Epson Aculaser CX16NF User Manual Download

Page: 30 / 213

REPORT/STATUS Menu

To display the REPORT/STATUS screen, select

REPORT/STATUS

in the main screen, and then press

the

Select

key. From this menu, the total number of pages printed by this machine can be viewed. In

addition, the reports can be printed. The REPORT/STATUS menu is structured as shown below.

Note:

To return to the previous screen, press the

Back

key. To display the main screen, press the

Stop/Reset

key.

TOTAL PRINT

The total number of pages for each of the following can be checked.

TOTAL PRINT

This counter shows the total number of pages printed.

MONO COPY

This counter shows the total number of pages copied in black-and-white.

COLOR COPY

This counter shows the total number of pages copied in color.

MONO PRINT

This counter shows the total number of pages printed in black-and-white.

COLOR PRINT

This counter shows the total number of pages printed in color.

FAX PRINT
(AcuLaser CX16NF only)

This counter shows the total number of pages that were faxed.

TOTAL SCAN

This counter shows the total number of document pages that were
scanned.

SUPPLY STATUS

The remaining amount of toner in the toner cartridges and the remaining service life of the
photoconductor units can be displayed as a percentage.

C TONER

Displays the remaining amount of toner in the cyan (C) toner cartridge as a
percentage.

M TONER

Displays the remaining amount of toner in the magenta (M) toner
cartridge as a percentage.

Y TONER

Displays the remaining amount of toner in the yellow (Y) toner cartridge as
a percentage.

K TONER

Displays the remaining amount of toner in the black (K) toner cartridge as a
percentage.

AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide

Control Panel and Configuration Menu

Summary of Contents for Aculaser CX16NF






















































































































































































































Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands

Epson Aculaser CX16NF, User Manual

Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands