4
Safety Instructions
❏
If you plan to use the printer in Germany, observe the following:
To provide adequate short-circuit protection and over-current
protection for this printer, the building installation must be
protected by a 10 or 16 amp circuit breaker.
Safety Information
Laser safety labels
w
Warning:
The use of controls, or the performance of procedures and
adjustments other than those specified in this guide may result in
hazardous radiation exposure.
Internal laser radiation
Max. Radiation Power 1.16 mW
Wave Length
775 to 795 nm
Your printer is a Class 1 laser product
as defined in the IEC60825
specifications. The label shown below
is attached in countries where
required.
This is a Class IIIb Laser Diode Assembly
that has an invisible laser beam. The
printer head unit is NOT A SERVICE ITEM,
Therefore, the printer head unit should
not be opened under any
circumstances. An additional laser
warning label is affixed to the inside of the
printer.
Summary of Contents for AcuLaser C1000
Page 13: ...Removing the Protective Materials 9 4 3 ...
Page 40: ......
