manualshive.com logo in svg

Epson ActionPrinter T-1000, User Manual

Share
Download
Epson ActionPrinter T-1000 User Manual Download Page 77

Installing an Interface

Before installing an interface, you must remove the printer’s cover.

WARNING: 

Do not remove the cover unless the printer is

turned OFF and unplugged because high voltages are present

inside the printer when the power is on. Also, do not touch

contacts on the circuit board of the printer because many of

the components can be destroyed by the static electricity

charge that may build up on your body.

1.

2.

3.
4.

Turn off the power to both the printer and the computer and unplug

the power cable and disconnect the interface cable from the printer.
Remove the printer lid, tractor unit (if installed), paper rest (if

installed), and paper guide.
Remove the ribbon.

To remove the upper case of the printer, insert a flat-blade

screwdriver into each of the two holes at the front of the printer, as

shown in the illustration. Gently twist the screwdriver while pushing

it up until the upper case is loosened from the bottom.

Appendix A-3

Summary of Contents for ActionPrinter T-1000































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands