Epson ActionPrinter T-1000, User Manual

Page: 38 / 94

SelecType Operation
Selecting typestyles
In SelecType, each button has a function:
l
ON/OFF LINE
selects typestyles.
l
FORM FEED
sets the styles.
l
LINE FEED
turns SelecType off.
After turning on SelecType, follow these steps to select a typestyle:
1. Find the typestyle you want in the table below. All of the typestyles
listed in the table are available for draft mode. If you are in NLQ
mode, only emphasized and elite are available.
Mode
Typestyle
1
Emphasized
ABCDEFGHIJKLMnopqrstuvwxyz
2 Double-strike
ABCDEFGHIJKLMnopqrstuvwxyz
3 Condensed
ABCDEFGHIJKLMnopqrstuvwxyz
4
Elite
ABCDEFGHIJKLMnopqrstuvwxyz
2. Press the
ON/OFF LINE
button the number of times indicated in the
mode column. Be sure that the printer beeps each time you press the
ON/OFF LINE
button.
3.
Press
the FORM FEED
button to set the typestyle.
4. Press
the LINE FEED
button to turn SelecType off. The control panel
returns to its normal functions, but the printer is off line.
5.
Press
the ON/OFF LINE
button, and you are ready to print.
You can combine any of the modes listed in the above table when you
are in draft mode, except for emphasized and condensed. In NLQ, the
two available modes (emphasized and elite) may be combined.
If you wish to combine two modes, follow steps 1 through 3 above, then
return to step 1 and follow the entire sequence (steps 1 through 5). (Do
the same thing to combine three modes, but repeat steps
1
through 3 for
each of the first two modes you enter.) Always select the lowest mode
number first.
SelecType 2-3