Epson ActionPrinter 3250 Network Manual Download

Page: 36 / 133

Caution:

After turning off the printer, wait until the status lights go off before turning it back on;
otherwise the network interface may not work correctly.

Note for Mac OS X 10.2.4 or later:

Since the printer supports Bonjour/Rendezvous and is on by default, you can use the printer on a
network just by connecting it to the network. If you want to disable the Bonjour/Rendezvous
setting, use the printer’s control panel. See “Setting an IP Address on the Printer’s Control Panel”
on page 123 or “Setting an IP Address on the Printer’s Control Panel (Large Format Inkjet
Printers)” on page 126 for details.

Now, you can configure the network interface to use on the TCP/IP network and also install the
printer driver.

If you are using Windows, see “Configuring the Network Interface (For Windows Users)” on page
36.

If you are using Macintosh, see “Configuring the Network Interface (For Macintosh Users)” on
page 39.

Configuring the Network Interface (For Windows Users)

Configure the network interface for use on the TCP/IP network and install the printer driver on
your computer.

1. Insert the Software CD-ROM in the CD-ROM drive.

2. The Software Installation screen opens automatically.

If the Software Installation screen does not appear, double-click

EPSETUP.EXE

on the CD-ROM.

3. Click

User Installation

if it appears.

4. Make sure that all applications are closed, and then click the

Easy Install

button.

5. Select

Network

Note:

If your printer is connected to your computer with a USB cable or a parallel cable, select

Local

Then follow the on-screen instructions.

EPSON Network Guide

How To

Summary of Contents for ActionPrinter 3250






































































































































Search results

Summary of Contents for ActionPrinter 3250

Reviews:

Related manuals for ActionPrinter 3250

Brands by name

Popular brands

Epson ActionPrinter 3250, Network Manual

Search results

Summary of Contents for ActionPrinter 3250

Reviews:

Related manuals for ActionPrinter 3250

Brands by name

Popular brands