Epson ActionLaser 1600, Service Manual

Page: 15 / 181

Printer Features
MTBF (Mean Time Between Failures): 3000 power on hours (POH)
Jam rate:
1 out of 2,000 sheets or less
(excluding multiple-sheet feeding)
Feed failure:
1 out of 2,000 sheets or less
(excluding multiple-sheet feeding)
Multiple paper feeds:
1 out of 500 sheets or less
Paper curl height:
30 mm (1.2 inches) or less
Leading edge bending (1 cm or more): 1 out of 1,000 sheets
MTTR (Mean Time To Repair):
30 minutes or less
Durability:
5 years or 180,0000 sheets
E n v i r o n m e n t a l C o n d i t i o n s f o r O p e r a t i o n
( I n c l u d i n g I m a g i n g C a r t r i d g e )
Temperature:
50 to 95° F (10 to 35° C)
Humidity:
15 to 85% RH
Altitude:
2,500 m (8,200 feet) or lower
Allowable incline:
Printer should be installed on a level plane.
Illuminance:
3,000 lux or less (must not be exposed to
direct sunlight.)
Surrounding space:
Printer must have at least 4 inches
(100 mm) clearance on sides and rear.
E n v i r o n m e n t a l C o n d i t i o n s f o r S t o r a g e a n d T r a n s p o r t a t i o n
( E x c l u d i n g I m a g i n g C a r t r i d g e )
Temperature: 32 to 95° F (0 to 35° C) over full storage term
--4 to 131° F (--20 to 55° C) under extreme
conditions (extremes allowable for up to 1/30 of
storage term)
Temperature variation must be 18° F (10° C)
/hour or less
Humidity:
Drop test:
Vibration:
30 to 85 %
RH over full storage term
10 to 95 % RH under extreme conditions
(extremes allowable for up to 1/30 of storage
t e r m )
Clear to JIS Z0200-1987 Level 1
Vibration frequency 5 to 100 Hz and 100 to 5 Hz
Acceleration
l G
directions
3 directions
EPSON ActionLaser 1600 Service Manual
1-11