11. Press twice to save
the CH
O
PS setting.
12. Press twice to return to the READY message.
13.
Press the
ON LINE
button.
Note:
The READY message may not show O PS (indicating the
optional interface and
PostScript)
until after your first
job
is sent from your computer to the printer each time you turn on
your
printer.
14. Make sure that AppleTalk is active in the Chooser under the
Apple menu on your Macintosh.
15. Click LaserWriter in the Chooser menu. EPL-8000 appears
in the Select a LaserWriter box. Click on EPL-8000 and then
close the Chooser.
Note:
If
the LaserWriter printer
driver is not yet installed on your
computer, you can find it on one of your Macintosh System disks.
Use
your computer manual instructions
to install
if on your
Macintosh.
16. Begin printing using your application software.
6
