5. Secure the interface with the two screws provided with
the card.
6. Attach your LocalTalk cable to the LocalTalk port (indicated
by the icon) on the interface card. (Do not use the serial
port.) Then plug the other end of the cable into your
computer.
7. Plug the power cord into your printer and an electrical outlet.
Installing the PostScript Card
Caution:
Do not insert the card while the printer is turned on.
Do not touch the gold connectors along the card’s edge.
Do not use too muchforce when you insert and remove the
card. Otherwise, you may damage it.
1. Make sure the printer is turned off.
2. Hold the card so that the arrow on the card is aligned with
the arrow on slot A. (Do not use slot B.)
ActionLaser 1000/1500
EPL-8000
3. Gently but firmly slide the card into the slot as far is it can go.
4. Turn on the printer and computer.
3
