1-27
Setting Up the Printer
|
27
Unpacking and Assembling the
Epson Stylus Pro 9800
Follow these steps to assemble your printer and its stand. If you have the
Epson Stylus Pro 7800, see page 17 instead. Before you begin, make sure
you have sufficient space to set up and use the printer.
The following illustration shows the minimum space required for using the
Epson Stylus Pro 9800:
You will also need floor space of approximately 13 × 13 feet to assemble the
printer and stand.
Note:
When choosing a
place for the printer, leave
adequate room for easy
access and ventilation.
Avoid locations subject to
direct sunlight, excessive
heat, moisture, or dust.
Also avoid locations near
potential sources of
interference, such as loud
speakers, cordless
phones, TVs, or air
conditioners.
12 in.
12 in.
12 in.
24 in.
WARNING:
Two people are
required to unpack the
printer, and four are needed
to set it on the stand.
7800-9800Guide.book Page 27 Monday, April 10, 2006 11:59 AM
Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer
Page 4: ...4 7800 9800Guide book Page 4 Monday April 10 2006 11 59 AM ...
Page 16: ...16 16 Introduction 7800 9800Guide book Page 16 Monday April 10 2006 11 59 AM ...
Page 54: ...1 54 54 Setting Up the Printer 7800 9800Guide book Page 54 Monday April 10 2006 11 59 AM ...
Page 176: ... 176 176 Index 7800 9800Guide book Page 176 Monday April 10 2006 11 59 AM ...
