manualshive.com logo in svg

Epson 5700i - EPL B/W Laser Printer, Service Manual

Share
Download
Epson 5700i - EPL B/W Laser Printer Service Manual Download Page 33

EPL-5700L/5700i

Revision A

DISASSEMBLY AND ASSEMBLY

DISASSEMBLY AND ASSEMBLY

33

4.2.3  Main Control Board Removal

1. Remove the right cover (See section 4.2.2 of the EPL-5700 Service 

Manual).

2. Remove the control panel (See section 4.2.1 of this manual).

3. Remove the front cover (See section 4.2.7 of the EPL-5700 Service 

Manual).

4. Remove 10 screws (CS M3x8) securing the shield cover of the Main 

Control Board, and remove the shield cover (See section 4.2.9 of 
the EPL-5700 Service Manual).

5. Remove the harnesses which are connected to the connector on the 

Main Control Board.

6. Remove 10 screws (CS M3x8) securing the Main Control Board on 

the printer (See section 4.2.9 of the EPL-5700 Service Manual).

7. Remove a fixing screw for USB interface (CS M3x6) and two fixing 

screws for parallel interface (CP M3x6), and remove the board.

Figure 4-5.  Main Control Board Removal

Main Board Fixing Screws

USB Connector Fixing Screw

Parallel 
Connector 
Fixing 
Screws

Summary of Contents for 5700i - EPL B/W Laser Printer

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands