Random Seek Check
This test is identical to the sequential seek check, except that the seek
operation is performed on each track in random order instead of
sequential order. Select option 2 from the menu to start this test.
Write, Read Check
This test checks the ability of the selected disk drive to read and write
data from a diskette. The test writes to and reads from each cylinder
on the diskette, starting at the center.
Select option 3 from the menu to start this test.
If you have only one diskette drive, you see a prompt to remove the
diagnostics diskette (the Reference diskette) and insert a blank diskette
before running the test. You see these messages:
Use only a formatted blank diskette for this test.
Any data present may be erased.
If using drive A, remove your Diagnostics Disk.
Enter Y to start this check.
Enter N to return to the menu.
Make sure the blank diskette you prepared is in drive A, then press Y
and
Enter.
The program displays the current track number as each
cylinder is tested. For example, with a 1.2MB floppy disk, the first
message you see is:
Current track is 79
After the test is over, be sure the Reference diskette is in drive A
before you return to the device list.
Performing System Diagnostics
C-21
Summary of Contents for 386
Page 1: ...EPSON E Q U I T Y 3 8 6 2 0 User s Guide Y18499100101 ...
Page 4: ......
Page 188: ......
