Epson 2080 - LQ B/W Dot-matrix Printer, Service Manual

Page: 16 / 55

LQ-2080 Revision A
Product Description Operation Instruction 16
1.4 Operation Instruction
This section provides information on the LQ-2080 control panel buttons,
LED, and operations. Since the layout and functions of the control panel
are mostly common to those of LQ-2070, this section only provides the
information that is specific to LQ-2080. For other information, see LQ-
2070 Service Manual.
Operations at power on
Turning on the printer while pressing panel buttons executes the
functions shown in the following table.
Table 1-7. Operations at Power On
NOTE: Unlike the LQ-2070, the LQ-2080 doees not support the
quiet mode.
Table 1-8. Default Setting Menu
No. Load / Eject Function
1 Load / Eject LQ self test
2 LF / FF Draft self test
3 Condensed
Default setting (See the following table for
the setting menu.)
4 Load / Eject & LF / FF Data dump
5 Font & Tear Off / Bin EEPROM clear
6 Tear Off / Bin & Load / Eject
Clear EEPROM for Driving Line count for
ribbon change timing
7 Pause Bi-d adjustment
8 The others Not available.
Item Setting / Value *1
*1: Setings with bold weight meas the standard factory settings.
Page length for front tractor
3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8 inch,
8.5 inch, 11 inch, 70/6 inch, 12 inch, 14 inch, 17 inch
Page length for rear tractor
Skip over perforation On, Off
Auto tear off On, Off
Auto line feed On, Off
Print direction Auto, Bi-d., Uni-d.
I/F mode Auto, Parallel, Optional
Auto I/F wait time 10 sec., 30 sec.
Software ESC-P2, IBM 2391 Plus
Character table
Standard version / NLSP version: See Section 1.2 for
the character tables available.
PC437
International character set
for Italic table
Italic U.S.A., Italic France, Italic Germany, Italic U.K.,
Italic Denmark 1, Italic Sweden, Italic Italy, Italic Spain
1
0 slash On, Off
High speed draft On, Off
Input buffer On, Off
Buzzer On, Off
Auto CR (IBM 2391 Plus) On, Off
A. G. M. (IBM 2391 Plus) On, Off
Font
*2
*2: One of the fonts selected in the default setting is corresponding to others
(=other font) on the control panel. Following fonts are not selected in the default
setting mode; Draft, Roman, Sans serif, Courier, Prestige, and Script
OCR-B, Orator, Orator-S, Script C, Roman T,
Sans serif H
Roll paper On, Off