Epsolar ViewStar MT-100, Instruction Manual, Page: 8 / 56

4
1 Local temperature sensor
It is used for acquisition of ambient temperature to undertake temperature compensation
of charging and discharging parameters, when the remote temperature sensor is not
connected
2 Fault LED indicator
An LED indicator that shows faults of solar system
3 Charging LED indicator
An LED indicator that shows charging status
4 Liquid crystal display (LCD)
Monitoring interface for solar system parameters
5 Combined-t ype buttons
4 combined-type buttons accomplish all operations to controller
6 Communication interface
Connect remote displaying unit MT-100 (Optional Accessories)
7 Load terminals
Connect loads
8 Battery terminals
Connect batteries
9 Solar module terminals
Connect solar modules
10 Remote temperature sensor interface
Connect remote temperature sensor TS-R (Optional Accessories) to acquire of ambient
temperature for undertaking temperature compensation of charging and discharging
parameters, when it is in connection.