Epsolar ViewStar MT-100, Instruction Manual, Page: 26 / 56

22
Charging and Discharging Parameters Setting Interface
In the main menu interface, when press or , the inverse cursor
moves between interfaces of main menu 1 and main menu 2. when the inverse cursor
rests on
3 Parameter Set
in main menu 1, press to enter into charging and
discharging parameters setting interface whose displaying interface as follows. When
press , it moves back to the previous interface and the inverse cursor rests on
the position of the first parameter.
Control voltage setting please in strict accordance with Over Volt . Disc Charg Lmt
Equal Boost Float Boost V . Rect or Under V . Rect Under V. Warn
Low V. Disc Discharg Lmt , Please refer to chapter 6 control voltage table while
setting.
Temperature compensation coefficient
Press or , then the inverse cursor moves among every
parameters. When is continuously pressed, the inverse cursor returns to the
main menu. Press or to modify temperature compensation
coefficient.
+
-
Parameter Set
Temp Compensate Coeff
- 0 5.0mV / / 2V
+
-