Epsolar ET2415N, Instruction Manual

Page: 6 / 64

Page
1
1.0 Important Safety Information
Save these instructions.
This manual contains important safety, installation and operating instructions for
eTracer.
The following symbols are used throughout this manual to indicate potentially
dangerous conditions or mark important safety instructions, please take care when
meeting these symbols.
WARNING: Indicates a potentially dangerous condition.
Use extreme caution when performing this task.
CAUTION: Indicates a critical procedure for safe and proper
operation of the controller.
NOTE: Indicates a procedure or function that is important for the
safe and proper operation of the controller.
General Safety Information
·
Read all of the instructions and cautions in the manual before beginning installation.
·
There are no user serviceable parts inside the eTracer. Do not disassemble or attempt
to repair the controller.
·
Mount the eTracer indoors. Prevent exposure to the elements and do not allow water
to enter the controller.
·
Please install controller in ventilated places, the temperature of heat sink may be
quite high when working.
·
Install external fuses/breakers as required.
·
Disconnect the solar module and fuse/breakers near to battery before installing or
adjusting the eTracer.
·
Confirm that power connections are tightened to avoid excessive heating from loose
connection.