EPS eSoft Pro, Installation Manual

Page: 5 / 5

Naas, Co. Kildare
T
045 843614
E info@epswater.ie W epswater.ie / esoft.ie
Mallow, Co. Cork
T
022 31200
Ballyhaunis, Co. Mayo
T
094 9633500
Mountrath, Co. Laois
T
057 8732279
Naas, Co. Kildare
T
045 843614
Installer Information
Installed by: Date:
Mallow, Co. Cork
T
022 31200
Ballyhaunis, Co. Mayo
T
094 9633500
Mountrath, Co. Laois
T
057 8732279
Softener Specification 8 x 13 8 x 17 8 x 24 10 x 35
Total Height 523mm 625mm 800mm 1095mm
Total Depth 440mm 440mm 440mm 580mm
Width 240mm 240mm 240mm 350mm
Maximum working pressure 5 bar 5 bar 5 bar 5 bar
Minimum working pressure 1.7 bar 1.7 bar 1.7 bar 1.7 bar
Service flow rate 10L/min 10L/min 15L/min 23L/min
Pressure drop at service flow 0.2 bar 0.2 bar 0.35 bar 0.55 bar
Resin Volume 5 litres 8 litres 20 litres 30 litres
Minimum supply flow rate 5L/min 8L/min 8L/min 8L/min
Salt use per regeneration 0.75 kgs 1.2 kgs 3.0 kgs 4.5 kgs
Inlet / Outlet / Drain connections ¾” BSPM ¾” BSPM ¾” BSPM ¾” BSPM
Overflow connections
⅜
” hose sigot
⅜
” hose sigot
⅜
” hose sigot
⅜
” hose sigot
Softening capacity @ 300ppm 830 litres 1330 litres 2500 litres 5000 litres
Note:
It is not recommended to install any water softener in an attic.
Specification