19
Running a Control Solution Test
You need the meter, a test strip, and control solution.
3.
Place the meter on a flat surface,
like a table.
4.
Remove the control solution bottle
cap and wipe the tip of the bottle
with a tissue.
5.
Squeeze the bottle until a tiny
drop forms at the tip of the control
solution cap.
Note: Setting the meter in control solution mode “CTL
”
will prevent the control solution reading
from being added to your memory.
1.
Put a test strip into the meter in
the direction of the arrow and
the icon of
shows itself.
2.
Press
or
to set the mode of
control solution
“ ”.
Press to confirm the setting.