Page 37
EPS Stromversorgung GmbH
Alter Postweg 101 • 86159 Augsburg
Germany
Fon: +49 821 / 570451-0
Fax: +49 821 / 570451-25
PS 9000 1U Series
3.4.7 The quick menu
The quick menu is an alternative menu for quick access to offline features while the DC output is online.
It is accessible with the
button and looks like this:
Navigation in the menu is also done with arrow buttons
/
and
.
You can select the between view mode and the HMI lock, each with three button pushes.
Attention! If you activate the HMI from within the quick menu, the additional PIN lock might
become active, depending on your settings in the MENU. There is no extra indication here!
3.4.8 Switching the DC output on or off
The DC output of the device can be manually or remotely switched on and off. This can be restricted in manual
operation by the control panel being locked.
Switching the DC output on during manual operation or digital remote control can be disabled by
pin REM-SB of the built-in analog interface. For more information refer to 3.4.3.1 and example
a) in 3.5.4.7.
►
How to manually switch the DC output on or off
1.
As long as the control panel (HMI) is not fully locked press the button
. Otherwise you are asked to
disable the HMI lock first.
2.
This button toggles between on and off, as long as a change is not restricted by an alarm or the device is
locked in “remote”. The current condition is displayed with the LED in the button
(LED on = output on).
►
How to remotely switch the DC output on or off via the analog interface
1.
See section
“„3.5.4 Remote control via the analog interface (AI)“ on page 39.
►
How to remotely switch the DC output on or off via the digital interface
1.
See the external documentation “Programming Guide ModBus & SCPI” if you are using custom software, or
refer to the external documentation of LabView VIs or other software, if available, provided by the manufacturer.
