Page 27
EPS Stromversorgung GmbH
Alter Postweg 101 • 86159 Augsburg
Germany
Fon: +49 821 / 570451-0
Fax: +49 821 / 570451-25
PS 9000 2U Series
1.9.3 Scope of delivery
1 x Power supply device
1 x AC cord (IEC type plug, 250 V, 16 A)
1 x Share Bus plug
1 x Remote sensing plug
1 x 1.8 m USB cable
1 x USB stick with documentation and software
1 x Set of metal strip for reconfiguration of desktop <-> 19”
1.9.4 Accessories
For these devices the following accessories are available:
CABINET
19“-rack
Racks in various configurations up to 42U as parallel systems are available, or
mixed with electronic load devices to create test systems. Further information in
our product catalogue, on our website or upon request.
1.9.5 Options
These options are usually ordered along with the order of a new unit, because they are permanently built-in during
the manufacturing process. Retrofitting upon request.
3W
GPIB interface
Replaces the standard Ethernet port by a permanently installed GPIB port. The
device will keep the USB and analog interfaces. Via the GPIB port, it can only
support SCPI commands.
HS
„High-Speed Ramping“
Increased output voltage dynamics through reduced output capacity.
NOTE: other output values, as well as ripple also increase. This is a permanent
feature which cannot be switched off.
Device with this option will have a different ordering number. See
.