EPS Stromversorgung 06230204, Operating Manual, Page: 25 / 66

Page 25
EPS Stromversorgung GmbH
Alter Postweg 101 • 86159 Augsburg
Germany
Fon: +49 821 / 570451-0
Fax: +49 821 / 570451-25
www.eps-germany.de
info@eps-germany.de
PS 9000 2U Series
Figure 6 - Control Panel
Overview of the elements of the operating panel
For a detailed description see section „1.9.6. The control panel (HMI)“ .
(1)
Display
Used for indication of set values, menus, conditions, actual values and status.
(2)
Left hand rotary knob, with button function
Turn: adjusts various set values which are related to the DC output voltage.
Push: selects the decimal position of a value to be changed (cursor)
(3)
Button bank
Button : Activates the setup menu for various device settings (see „3.4.3. Configuration in the setup
menu“)
Button : Navigates through menus, submenus and parameters (direction: up / left)
Button : Navigates through menus, submenus and parameters (direction: down / right)
Button : Submits altered parameters or set values in submenus, as well enters submenus. Can also
be used to acknowledge alarms
Button : Cancels changes of parameters in the setup menu or leaves submenus
(4)
Right hand rotary knob, with button function
Turn: adjusts various set values which are related to the DC output current, the DC output power. Also
adjusts parameters in the setup menu.
Push: selects the decimal position of a value to be changed (cursor)
(5)
On/Off Button for DC output
Used to toggle the DC output between on and off, also used to acknowledge alarms. The LEDs “On” and
“Off” indicate the state of the DC output, no matter if the device is manually controlled or remotely.