5
5.
Squeeze the bottle until a tiny
drop forms at the tip of the
control solution cap.
6.
Touch the drop to the Blood
collection area at the end of
the test strip.
7.
Do not put control solution on
top of the test strip.
11.
Remove the test strip and
throw it away after you have
compared the reading to the
range printed on the test strip
bottle.
8.
When the icon of shows, the
meter beeps, you have enough
control solution for the test.
9.
The meter starts to count down from
5 seconds and will show the results.
A result appears on the display.
10
. Don’t remove the test strip yet.
Check if the reading falls within the
range printed on the test strip bottle.
