Page 6
1. Insert batteries, the
meter turns on
automatically.
2. The last 2-digits of the
year flash at the top of
the display. Press “ “ or
“ “ to adjust the year
and press to confirm
setting.
4. Press “ “ or “ “ to turn on or
turn off the volume and press
to confirm the setting.
Note: The unit of Blood Glucose Meter is set at mg/dL without any modification function.
3. Repeat step 2 to set the
date and time. The flashing
field is the one you are
currently setting.
(A=AM, P=PM)
Setting the Time, Date and Sound Volume-First Time Use
Setting the current time and date in your meter is important if you use the meter memory.
You can also set the time, date and sound volume without replacing the batteries.
1. Keep pressing “ “ until you see the
“SEL”. After 2 seconds the meter
enters the setting mode automatically.
2. Repeat step 2 to 4 above to set the
year, date, time and sound volume.
The flashing field is the one you are
currently setting.
