38
10.3 Replacing the Anode
Please refer to the figure below to replace a new anode if necessary.
Anode
Figure 10-1
10.4 Maintenance Time Table
Regularly maintained in proper manner and used in normal condition, the
outboard can work at its optimal state. The following table shows a general
maintenance frequency, which however may vary according to operating
conditions.
Item
Operations
Initial
Every
50 hours
(3 months)
100 hours
(6 months)
200 hours
(12 months)
Anode
Check/Replace
□
□
■
Greasing
points
Greasing
□
■
Propeller
and pin
Check/Replace
□
□
■
The "
□
" symbol indicates checks may be carried out by users. The "
■
"
symbol indicates work to be carried out by your dealer.
