- 31 -
position, attach the ring to keep the fixing pin from dropping out.
Step3: Put the
fixing pin to the
desired position.
Figure 7-3
Step4: Toggle the tilt handle again to lay down the outboard motor, and the
outboard motor will stay at the desired trim angle.
Figure 7-4
Step5: Try to tilt up the outboard and test if the fixing angle is successfully
fixed.
Tests with different trim angles are recommended to help find the best
working trim angle for the boat and operating conditions. Note that increase
the speed gradually when test, watch for water cavity and other instability
problems, if the problem become serious, stop the outboard immediately and
try to decrease the trim angle.
Summary of Contents for SPIRIT 1.0
Page 38: ... 37 Creasing Map ...
