20
Figure 7-4
If the outboard is replaced with a new one, the original wireless link will
break and wireless communication failure will occur. The main page of
the LCD panel on the Tiller Handle will display as below. In this case,
users should conduct pairing again.
Figure 7-5
However, if the outboard motor is not replaced, but the LCD panel still
displays like this, you should check and:
1)
Make sure the Tiller Handle is not far from the outboard motor;
2)
Make sure all the equipment involved is normally powered on.
If the Tiller Handle displays like Figure 7-5 after check, it indicates an
error has occurred. Please contact your dealer for repair.
+
-
Main
Switch
①
②
③
③
+ -
Communication
Cable
Tiller Handle
④
