18
7 Pairing Tiller Handle to the Outboard
There are three pairing methods. Please choose one proper method
and follow the procedures.
a. Pairing Wirelessly
Step1:
Switch off both NAVY outboard and Tiller Handle.
Hold the Tiller Handle within 0.5m to the head part of the outboard
.
Step2:
Press and hold the “
” button on the Tiller Handle to switch on.
Step3:
Press “
” button and hold
5s
to enter the pairing setting page
(Figure 7-1). On this page, you can find blinking “
” (address)
and “
” (set), and a countdown timer “
” (60s).
Figure 7-1
Step4:
Switch on NAVY power. Wait for them to get paired in a few seconds.
Step5:
After pairing, the LCD screen will display as Figure 7-2 for 5s, then
returning to home page automatically.
Figure 7-2
If pairing fails within 60s, go back to
Step3
and try again.
b. Pairing by Communication Cable with a 48V Battery
Step1:
Switch off both NAVY outboard and Tiller Handle.
Step2:
Connect NAVY outboard and Tiller Handle with a communication
cable. Please refer to Figure 7-3.
