Operating Manual PR 9268/60, PR 9268/70
Safety instructions
Seite 7
2.
SAFETY INSTRUCTIONS
The sensors left the factory in perfect condition, relative to technical safety. To maintain this
condition and for hazard-free operation all of the following instructions in this manual must be
followed carefully.
The correct and safe use of this device requires, that operating and service personnel is fa-
miliar with generally valid safety guidelines, complies with them and heeds the special safety
comments that are listed in this manual. Where necessary, points on the device that are
safety-sensitive, are marked.
Because the device is electrical operating material it should only be com-
missioned and operated by instructed personnel. Repair is on possible at
epro
.
2.1
Owner’s responsibility
If there is reason to suspect that hazard-free operation, and thus adequate machine protec-
tion is no longer possible, then the device must be taken out of service and safeguarded from
unintentional operation. This is the case
-
if the device shows visible damage
-
if the device no longer works
-
after any type of overload (e.g. storage, transport) that exceeds permissible limits.
i
