Stand 01.09.11, BS 125 GS, band saw
Page 25 of 44
4.13 Insert saw table and saw perpendicular
The band saw possibles cuts at work parts with
perpendicular standing bow at an optional mountable
table.
If you want to move the bow back into a horizontal
position, you have to remove the table.
Position the bow perpendicular and fix it
Mount the saw table with support at the lower
guide
Adjust the table at this height
4.14 Working notes
4.14.1 General notes
Remove all unnecessary parts (tool etc.) from
the machine
Assure that the running direction, clamping and tracking ability of the saw
band is given
Check the condition of the saw band
Only work with blameless saw bands
Only use saw bands that are adequate for the material
4.14.2 Fixing the work part in the vice
Assure that the work part is clamped feast and orderly in the vice
Shore up the overlaying parts with a support block
Summary of Contents for BS 125 GS
