3-16 CHAPTER 3
3-9 IDE HDD AUTO DETECTION
The "IDE HDD AUTO DETECTION" utility is a very useful tool especially when you
do not know which kind of hard disk type you are using. You can use this utility to detect
the correct disk type installed in the system automatically.
But now
you can set
HARD
DISK TYPE
to
Auto
in the
STANDARD CMOS SETUP
. You do not need the "IDE HDD
AUTO DETECTION" utility. The BIOS will Auto-detect the hard disk size and model on
display during POST.
ROM PCI/ISA BIOS(2A5LDPA9)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Figure 3-9 IDE HDD AUTO DETECTION
HARD DISKS TYPE SIZE CYLS HEADS PRECOMP LANDZONE SECTORS MODE
Primary Master : 343 665
16 65535 664 63
NORMAL
Primary Slave :
Secondary Master :
Secondary Slave :
Select Secondary Slave Option (N=Skip) : N
OPTIONS SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
1 (Y) 0 0 0 0 0 0 NORMAL
ESC : Skip
NOTE: HDD Modes
The Award BIOS supports 3 HDD modes : NORMAL, LBA and LARGE
NORMAL mode.
Generic access mode that is neither the BIOS nor the IDE controller will
make transformations during accessing.
The maximum nunbers of cylinders, head & sectors for NORMAL mode are
1024, 16 and 63.
no. Cyclinder (1024)
x no. Head ( 16)
x no. Sector ( 63)
x no. per sector ( 512)
528 Megabytes
If user sets his HDD to NORMAL mode, the maximum accessible HDD size
will be 528 Megabytes even though its physical size may be greater than that!
