EPOX KP6-LA, User Manual

Page: 25 / 69

Installation KP6-LA
Page 3-7
Figure 3
To remove the SIMM module: release the clips on both sides of the SIMM socket
(figure 4).
Figure 4
DIMM Module Installation
Figure 5 displays the notch marks and what they should look like on your DIMM
memory module.
DIMMs have 168-pins and two notches that will match with the onboard DIMM
socket. DIMM modules are installed by placing the chip firmly into the socket at a
90 degree angle and pressing straight down (figure 6) until it fits tightly into the
DIMM socket (figure 7).
Figure 5
SIMM Release
Clip
CENTER KEY ZONE
(3.3 V DRAM)
LEFT KEY ZONE
(UNBUFFERED)