BIOS
EP-V370Y
Page 4-3
NOTE: The “Halt On:” field is used to determine when to halt the system
by the BIOS if an error occurs.
NOTE: Floppy 3 Mode support is a mode used to support a special 3.5”
drive used in Japan. This is a 3.5” disk that stores only 1.2 MB, the default
setting for this is disabled.
4-2 BIOS Features Setup
Selecting the “BIOS FEATURES SETUP” option in the CMOS SETUP UTILITY
menu allows users to change system related parameters in the displayed menu. This
menu shows all of the manufacturer’s default values for the EP-V370Y.
Pressing the [F1] key will display a help message for the selected item.
Figure 3: BIOS Features Setup
Virus Warning: During and after the system boots up, any attempt to write to the
boot sector or partition table of the hard disk drive will halt the system and an error
message will appear.
You should then run an anti-virus program to locate the virus. Keep in mind that this
feature protects only the boot sector, not the entire hard drive.
The default value is Disabled.
ROM PCI/ISA BIOS(2A6LFPAE)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
Virus Warning
: Disabled
Video BIOS
Shadow
: Enabled
CPU Internal Cache
: Enabled
C8000-CBFFF
Shadow
: Disabled
External Cache
: Enabled
CC000-CFFFF
Shadow
: Disabled
CPU L2 Cache ECC Checking
: Disabled
D0000-D3FFF
Shadow
: Disabled
Quick Power On Self Test
: Enabled
D4000-D7FFF
Shadow
: Disabled
Boot Sequence
: A, C, SCSI
D8000-DBFFF Shadow
: Disabled
Swap Floppy Drive
: Disable
DC000-DFFFF Shadow
: Disabled
Boot Up Floppy Seek
: Enabled
Boot Up NumLock Status
: On
Gate A20 option
: Fast
Memory Parity/ECC Check
: Disabled
Typematic Rate Setting
: Disabled
Typematic Rate (Chars/Sec)
: 6
Type matic Delay (Msec)
: 250
Security Option
: Setup
PCI/VGA Palette Snoop
: Disabled
OS Select For DRAM > 64MB
: Non-OS2
Report NO FDD For Win 95
: Yes
Esc : Quit
: Select Item
F1
: Help
PU/PD/+/- : Modify
F5
: Old Values
(Shift) F2
: Color
F7
: Load Setup Defaults
é
é
é
é
é ê
ê
ê
ê
ê è
è
è
è
è ç
ç
ç
ç
ç
