Installation
EP-V370Y
Page 3-8
Power On/Off - This is connected to the power button on the case.
Using the Soft-Off by Pwr-BTTN feature, you can choose either Instant
Off (turns system off immediatly), or 4 sec delay (you need to hold the
button down for 4 seconds before the system turns off). When the
system is in 4 sec delay mode, there is a special feature to make the
system to go into suspend mode when the button is pressed
momentarily.
J2
Section 3-3
Device Connectors
(continued)
Speaker - Connect to the system's speaker for beeping
1. Speaker
3. GND
2. N/C
4. GND
Reset - Closed to restart system.
Turbo LED indicator - LED ON when higher speed is selected
IDE LED indicator - LED ON when Onboard PCI IDE Hard disks is
activate
KeyLock - Keyboard lock switch & Power LED connector
1. Power LED(+) 4. Keylock
2. N/C
5. GND
3. GND
J3
1
+
+
1
* The power LED lights when the
system is powered on and blinks in
SLEEP MODE (Suspend mode).
IR Connector
1. VCC
4. GND
2. NC
5. IRTX
3. IRRX