2-6 EP-5BTXA-E
DIMM (M1)
DIMM2 (M2)
TOTAL Memory
(BANK 0)
(BANK 1)
MAX. = 256MB
NOTE :
1. DIMM module specification is 3.3V / unbuffered Synchronous
DRAM
SDRAM
SDRAM
8MB, 16MB
8MB, 16MB
32MB, 64MB
32MB, 64MB
=
128MB
128MB
x 1
DIMM2
2-3 System Memory Configuration
The
EP-5BTXA-E
supports two 168-pin DIMM module sockets to extend system
memory size. There is not jumper by hardware setting needed for memory configura-
tion. The following figures show all possible memory combinations.
DIMM1
>
BANK 0
BANK 1
>
3.3V Synchronous DRAM
or 3.3V EDO DRAM
3.3V Synchronous DRAM
or 3.3V EDO DRAM
Memory Configuration Table
x 1
CENTER KEY ZONE
(3.3 V DRAM)
LEFT KEY ZONE
(UNBUFFERED)
DIMM Module Installation
Figure 2-2 displays the notch marks and what they should look like on your
DIMM memory module.
DIMMs have 168-pins and two notches that will match with the onboard
DIMM socket. DIMM modules are installed by placing the chip firmly into
the socket at a 90 degree angle and pressing straight down (figure 2-3) until
it fits tightly into the DIMM socket (figure 2-4).
Figure 2-2