EPOX EP-4PEA, User Manual

Page: 55 / 100

BIOS
Page 4-19
PWRON After PWR-Fail
This item enables your computer to automatically restart or return to its last
operating status after power returns from a power failure.
Off: The system stays off after a power failure.
Former-Sts: The system returns to the state it was in just prior to the power
failure.
Power Management
Use this to select your Power Management selection. The default is User define.
Max. saving : Maximum power savings. Inactivity period is 1 minute in each mode.
Min. saving : Minimum power savings. Inactivity period is 1 hour in each mode.
User define : Allows user to define PM Timers parameters to control power
saving mode.
Video Off Method
This option allows you to select how the video will be disabled by the power
management. The default is V/H Sync + Blank
V/H Sync + Blank : System turns off vertical and horizontal synchronization
ports and writes blanks to the video buffer.
DPMS Support : Select this option if your monitor supports the Display
Power Management Signaling (DPMS) standard of the Video
Electronics Standards Association (VESA). Use the soft-
ware supplied for your video subsystem to select video
power management values.
Blank Screen : System only writes blanks to the video buffer.
Video Off In Suspend
Lets you enable the video to power off in suspend mode.
No : Video power off not controlled by power management.
Yes : Video powers off after time shown in suspend mode setting.
Suspend Type
Determines CPU status during power saving mode.
Stop Grant: CPU goes into idle mode during power saving mode.
PwrOn suspend: CPU and system remain powered on in suspend mode.