manualshive.com logo in svg

EPOX EP-3WXA, User Manual, Page: 13 / 70

Share
Download
EPOX EP-3WXA User Manual Download Page 13

Introduction

EP-3WXA/4/4Y

Page 1-7

I/O Shield Connector

The EP-3WXA/4/4Y is equipped with an I/O back panel.  Please use the appropri-

ate I/O shield (figure 3).

Power-On/Off (Remote)

The EP-3WXA/4/4Y has a single 20-pin connector for ATX power supplies. For

ATX power supplies that support the Remote On/Off feature, this should be

connected to the systems front panel for system Power On/Off button. The

systems power On/Off button should be a momentary button that is normally

open.

The EP-3WXA/4/4Y has been designed with “Soft Off" functions. You can turn

Off the system from one of two sources: The first is the  front panel Power On/

Off the button, and the other is the "Soft Off" function (coming from the EP-

3WXA/4/4Y’s onboard circuit controller) that can be controlled by the operating

system.  Windows 95/98 will control this when the user clicks that they are ready

to Shutdown the system.

Case (chassis) Power
ON/OFF button

Figure 4: Simple ATX Power

ON/OFF Controller

Figure 3: I/O back panel layout

parallel port

MIC

Joystick/Midi port

USB port

COM1

VGA1

Speaker

Line_in

PS/2 Mouse

PS/2

KEYBOARD

J3

ATX
POWER SUPPLY

Summary of Contents for EP-3WXA







































































Reviews:

No comments