PM01BA0 REV 1.0 602A002BPT100
~10~
Of course, you can re-establish the link by turning the power
switch off and on again and then following the steps of
section D.
&
Note3: The lever of directional switch is not designed
to handle the strong rotated force. Please use the lever
moderately. (P.S. Rotational: No damage with an application
of 0.15N.m.)
&
Note4: In the case where the applied turn strength is too
strong, the lever will be fix. Please move lever any direction.
It will operate again.
&
Note5: Please change your battery if the "Low Battery"
message is shown on your system try or the laser beam is
getting dark.
E. CAUTION TO USE THE LASER BUTTON
Since the laser beam is harmful to human eyes, please be
careful to use the laser pointer.
Warning
Don’t point to the eyes.
Don’t disassemble it.
Summary of Contents for BT-PM01B
Page 45: ...PM01BA0 REV 1 0 602A002BPT100 45 F 在這您可以更改您的連接埠設定 例如 請將您的連接埠更改為 COM9 並且按 OK 完成設定 ...
Page 55: ...PM01BA0 REV 1 0 602A002BPT100 55 C 在随后出现的软件欢迎界面中点击 Next 驱动程序将会被自动安装 D 点击 Yes 同意软件授权协议 ...
Page 61: ...PM01BA0 REV 1 0 602A002BPT100 61 F 您可以在如下图所示的 COM Port 下拉式菜单中更改 COM 口设置 G 比如您可以选择 COM9 点击 OK ...
