manualshive.com logo in svg

EPOX ADE-9040, User Manual, Page: 53 / 55

Share
Download
EPOX ADE-9040 User Manual Download Page 53

ADE-9040 User’s Manual

 

53 / 55 

 

4.1.6.2 South 

Bridge Configuration 

You can use this screen to select options for the South Bridge Configuration. South Bridge 

is a chipset on the motherboard that controls the basic I/O functions, USB ports, audio 

functions, modem functions, IDE channels, and PCI slots. Use the up and down <Arrow> 

keys to select an item. Use the <Plus> and <Minus> keys to change the value 

of the selected option. 

Note: 

The South Bridge Configuration setup screen varies depending on the supported 

South Bridge chipset. 

 

4.1.6.2.1 USB  Functions 

This item allows you to active USB ports. 

4.1.6.2.2 USB 2.0 Controller 

Select “Enabled” if your system contains a Universal Serial Bus 2.0 (USB 2.0) controller 

and you have USB peripherals. 

The choice: Enabled, Disabled. 

4.1.6.2.3 HDA  Controller 

This item allows you to select the chipset family to support High Definition Audio Controller. 

The choice: Disabled, Enabled. 

Summary of Contents for ADE-9040
























































Reviews:

No comments