manualshive.com logo in svg

EPOX ADE-9040, User Manual, Page: 23 / 55

Share
Download
EPOX ADE-9040 User Manual Download Page 23

ADE-9040 User’s Manual

 

23 / 55 

 

3.1.2 Installing 

Intel 

µFC-LGA 

775 CPU Fan, and Heat Sink 

•

 

The Intel µFC-LGA 775 CPU heat sink and fan assembly comes in a push-pin design 

and requires no tool to install. 

•

 

Place the fan with heat sink right above the CPU and make sure four pins matching 

the holes of the board. (8, 9) 

•

 

Press all push-pins down and rotate them to lock. (Please check the rear side of the 

board.) 

•

 

Place the CPU fan connector. 

   

   

 

 

 

3.1.3 Removing 

CPU 

•

 

Disconnect the CPU fan connector. 

•

 

Remove the CPU fan and heat sink first. 

•

 

Unlock the Intel µFC-LGA 775 Pentium 4 processor. 

•

 

Carefully lift up the existing CPU to remove it from the socket. 

•

 

Follow the steps of installing a CPU to change to another one. 

 

Warning

：

 

For a safety landing, avoid leaving prongs on hard surface. 

Instructions

：

Smear thermal grease on the top of the CPU. Lower the CPU fan onto the 

CPU/CPU socket and secure it using the attachments or screws provided 

on the fan. Finally, attach the fan power cable to the CPUFAN adapter. For 

more details on this, go to 

http://www.intel.com

 

8 

9 

Push-pin 

Board’s hole 

CPU fan connector 

Summary of Contents for ADE-9040
























































Reviews:

No comments